Drag forces on a semisubmersible platform column for different corners curvature radius

Joel Sánchez Mondragón, Oscar Alfredo Godoy Marroquin, Aldo Roberto Cruces Girón, Iván Félix González


In an early design stage of a floating production system, the definition of certain important characteristics are required, such as production or storage capacities, and others related to the strength of the floating system hull against waves, wind and current forces. Based on these, the dimensions of the platform are derived, and in the particular case of semi-submersible platforms and tensioned leg platforms the dimensions of their columns, as well as the curvature radius of the column corner. This work focuses on the calculation of marine current drag forces on a large dimension column (17.2 m width) considering a range of curvature radius on corners. Reducing marine current forces is a very important issue in floating oil production platforms with large dimensions columns (as semisubmersibles or tension leg platforms). In order to capture turbulence effects three-dimensional Reynolds-Averaged Navier-Stokes (RANS) simulations are developed using k-ω Shear Stress Transport (SST) viscous model. Even for small current velocities, high Reynolds numbers are presented due to the large column dimensions. Results show that drag forces has a fast decay for radius from 1 m to 1.5 m, for greater radius drag forces presents small changes. Additionally, flux behavior is analyzed; the associated vertical flux that modifies the horizontal behavior about the vertical level and the flux trace behavior in function of Reynolds number.

Palabras clave

CFD analysis; Drag coefficient; Offshore structure; Column with square transverse section; High Reynolds number

Texto completo:



Bearman, P. W., Graham, J. M. R., Obasaju, E. D., Drossopoulos G. M., 1984, "The influence of corner radius on the forces experienced by cylindrical bluff bodies in oscillatory flow," Applied Ocean Research 6(2), pp. 83-89.

Okamoto, S., Uemura, N., 1991, "Effect of rounding side-corners on aerodynamic forces and turbulent wake of a cube placed on a ground plane," Experiments in Fuids 11(1), pp. 58-64.

Kawai, H., 1998, "Effect of corner modifications on aeroelastic instabilities of tall buildings," Journal of Wind Engineering and Industrial Aerodynamics 74-76, pp. 719-729.

Tamura, T., Miyagi, T., Kitagishi, T., 1998, "Numerical prediction of unsteady pressures on a square cylinder with various corner shapes," Journal of Wind Engineering and Industrial Aerodynamics 74-76, pp. 531-542.

Miran, S., Sohn, C. H., 2015, "Numerical study of the rounded corners effect on flow past a square cylinder," International Journal of Numerical Methods for Heat and Fluid Flow 25(4), pp. 686-702.

Miran, S., Sohn, C. H., 2016, "Numerical investigation of the effect of corner radius on forced oscillating square cylinder," Journal of Applied Fluid Mechanics 9(6), pp. 3013-3022.

Ong, M. C., 2012, "Unsteady RANS simulation of flow around a 5:1 rectangular cylinder at high reynolds numbers," Proceedings of the ASME 2012 31st, International Conference on Ocean, Offshore and Artic Engineering, Rio de Janeiro, Brazil, July 1-6. (OMAE2012-83719)

Tian, X., Ong, M. C., Yang, J., Myrhaug, D., 2013, "Unsteady RANS simulations of flow around a rectangular cylinders with different aspect ratios," Ocean Engineering 58, pp. 208-216.

Sohankar, A., 2014, "A LES study of the flow interference between tandem square cylinder pairs," Theoretical and Computational Fluid Dynamics 28, pp. 531-548.

Tong, J. C. K., Abraham, J. P., Tse, J. M., Sparrow, E. M., 2015, "Using corner chamfers to reduce the drag of flat-sided columns," Proceedings of the Institution of Civil Engineers: Engineering and Computational Mechanics 168(2), pp. 79-88.

Dai, S. S., Younis, B. A., Zhang, H. Y., Zhang, R. Y., 2016, "Numerical simulation of the influence of rounded corners on flow around a square column," Proceedings of the ASME 2016 35th, International Conference on Ocean, Offshore and Artic Engineering, Busan, South Korea, June 19-24. (OMAE2016-54512)

Wang, M., Catalano, P., Iaccarino, G., 2001, "Prediction of high Reynolds number flow over a circular cylinder using LES with wall modeling," Center for Turbulence Research Annual Research Briefs, pp. 45-50.

Catalano, P., Wang, M., Iaccarino, G., Moin, P., 2003, "Numerical simulation of the flow around a circular cylinder at high Reynolds numbers," International Journal of Heat and Fluid Flow 24, pp. 463-469.

Singh, S. P., Mittal, S., 2005, "Flow past a cylinder: Shear layer instability and drag crisis," International Journal for Numerical Methods in Fluids 47(1), pp. 75-98.

Ong, M. C., Utnes, T., Holmedal, L. E., Myrhaug, D., Pettersen, B., 2009, "Numerical simulation of flow around a smooth circular cylinder at very high Reynolds numbers," Marine Structures 22, pp. 142-153.

Yuce, M. I., Kareem, D. A., 2016, "A numerical analysis of fluid flow around circular and square cylinders," American Water Works Association 108(10), pp. E546-E554.

Younis, B. A., Teigen, P., Przulj, V. P., 2001, "Estimating the hydrodynamic forces on a mini TLP with computational fluid dynamics and design-code techniques," Ocean Engineering 28, pp. 585-602.

Vaz, G., Waals, O. J., Ottens, H., Fathi, F., Souëf, T. L., Kiu, K., 2009, "Current affairs: Model tests, semi-empirical predictions and CFD computations for current coefficients of semi-submersibles," Proceedings of the ASME 2009 28th, International Conference on Ocean, Offshore and Artic Engineering, Honolulu, Hawaii, USA, May 31 - June 5. (OMAE2009-80216)

Younis, B. A., Abrishamchi, A., 2014, "Three-dimensional turbulent vortex shedding from a surface-mounted square cylinder: Predictions with Large-Eddy Simulations and URANS," J. Fluid Eng. 136(6), Paper No. 060907.

Dai, S., Younis, B. A., Sun, L., 2015, "OpenFOAM predictions of hydrodynamics loads on full-scale TLP," Ocean Engineering 102, pp. 162-173.

Rosetti, G. F., Vaz, G., Condino-Fujarra, A. L., 2016, "On the effects of turbulence modeling on the fluid-structure interaction of a rigid cylinder," Proceedings of the ASME 2016 35th, International Conference on Ocean, Offshore and Artic Engineering, Busan, South Korea, June 19-24. (OMAE2016-54989)

An, H., Cheng, L. Zhao, M., Tong, F., 2016, "Numerical simulations of flow around a circular cylinder at high Reynolds number," Falata editorial (Ed.), Proceedings of the 12th Pacific-Asia Offshore Mechanics Symposium Gold Coast, Australia, October 4-7, pp. 40-46.

Bangga, G., Ashfahani, A., Sugianto, E., Sa'adiyah, D., Putri, T., Jost, E., Lutz, T., 2017, "Three-dimensional flow in the vicinity of a circular cylinder mounted to a flat plate at high Reynolds number," AIP Conference Proceedings 1788, Paper No. 030012.

Ong, M. C., Trygsland, E., Myrhaug, D., 2017, "Numerical study of seabed boundary layer flow around monopile and gravity-based wind turbine foundations," Journal of Offshore Mechanics and Arctic Engineering 139, Paper No. 042001.

Menter, F. R., 1993, "Zonal two equation k-ω turbulence models for aerodynamic flows," 24th Fluid Dynamics Conference, Orlando, Florida, July 6-9. (AIAA Paper No. 93-2906)

Menter, F. R., 1994, "Two-equation eddy-viscosity turbulence models for engineering applications". American Institute of Aeronautics and Astronautics Journal 32(8), pp. 1598-1605.

Wilcox, D. C., 1998, Turbulence Modeling for CFD, 2nd ed. DCW Ind., Inc., La Canada, CA.

Jones, W. P., Launder, B.E., 1973, "The calculation of low-Reynolds-number pheomena with a two-equation model of turbulence," International Journal of Heat and Mass Transfer 16(6), pp. 1119-1130.

"Na Kika Host Facility, Fact Sheet, BP.," last modified June 14, 2013, http://www.bp.com/content/d am/bp-country/en_us/PDF/Na_Kika_Fact_Sheet_6_14_2013.pdf

"International Towing Tank Conference, Fresh water and seawater properties," ITTC-Recommended. Procedures 2011, last modified September, 2011, https://ittc.info/media/4048/75-02-01-03.pdf.

Delany, N. K., and Sorensen, N. E., 1953, "Low-speed drag of cylinders of various shapes," National Advisory Committee for Aeronautics, Technical Note 3038.

Pang, A. L. J., Skote, M., Lim, S. Y., 2016, "Modelling high Re flow around a 2D cylindrical bluff body using the k-ω (SST) turbulence model," Progress in Computational Fluid Dynamics 16(1), pp. 48-57.

Tanaka, N., Ikeda, Y. and Nishino, K., 1983, "Hydrodynamic viscous force acting on oscillating cylinders with various shapes," Osaka University, Department of Naval Architecture, Report No. 407, 6th Symposium of Marine Technology of the Society of Naval Architects of Japan, 1982.

Enlaces refback

  • No hay ningún enlace refback.